Navigation

Roofing Materials for Flat Roofs


Fibre glass material GL-S 120*

Fibre glass material made out of textile glass fibres

Seperating/fire protection layer (A2) for the sealing of flat roofs between 
polystyrene and plastic membranes to avoid plasticiser migration.
Drillproof.

* Material guarantee registered with Central Association of German Roofing Contractors (ZVDH)


Polyester fleece PVh 300*

Needle-punched nonwoven material made out of polyester

Separating/protective layer for the renovation of flat roofs with
mechanical fastening, as well as for gravel roofs and as a separating/
protective layer for installation beneath sealing foils to prevent damage.
Rotproof, drillproof

* Material guarantee registered with Central Association of German Roofing Contractors (ZVDH)


Geotextile PES

Needle-punched nonwoven material made out of polyester

Protection, storage and drainage mat for green roofs/gravel roofs.
Protective layer to prevent erosion and relocation in water engineering, e.g. under pond liners.
Protective layer for embankment, platform and equestrian centre construction,
as well as for installation beneath landfill sealing.
Shelf life in the ground: a shelf life of at least 5 years at a pH-value of 4-9 and
a ground temperature of 25°C. 


Geotextile PES plus

Needle-punched nonwoven material made out of polyester.
CE marking EN 13249, 13250, 13251, 13252, 13253, 13254, 13255, 13257, 13265, 13256

Filtering, reinforcing and separating purposes in road construction and other traffic areas, earthworks and foundations, as well as in retaining structures for drainage systems, erosion protection systems (coastal protection) and sewer construction.
Durability in natural soils of at least 25 years.
Filtering, reinforcing and separating purposes for traffic areas, earthworks and foundations for Drainage systems.
Erosion protection systems for retention basins and dams, sewer construction and the disposal of solid waste.


Vapour barrier foil*

Special polyethylene film, coloured blue, CE marking EN 13984

Vapour barrier foil for flat and pitched roofs subject to low physical stresses on the building structure.

* Material guarantee registered with Central Association of German Roofing Contractors (ZVDH)


vliepatherm PAL*

Aluminium composite foil, CE marking EN 13984

Diffusion tight vapour barrier foil for flat and pitched roofs, as well as for single-ply roof constructions, especially for trapezoidal profile roofs.
This composite material meets the requirements according to DIN 18234 monolithic construction "Fire safety of large roofs for buildings".

* Material guarantee registered with Central Association of German Roofing Contractors (ZVDH)


vliepatherm AL-SK*

Self-adhesive aluminium composite foil with a polymer bitumen coating, CE marking EN 13970

Diffusion tight, self-adhesive barrier foil for trapezoidal and flat roofs.

**)This composite material meets the requirements according to DIN 18234 monolithic construction "Fire safety of large roofs for buildings".

* Material guarantee registered with Central Association of German Roofing Contractors (ZVDH)


vliepatherm protect pro SK

Self-adhesive aluminiumcomposite foil, CE marking EN 13984

Diffusion tight, self-adhesive vapour barrier foil for trapezoidal and flat roofs.
This composite material meets the requirements according to DIN 4108-7 and DIN 18234 structural fire protection of large roof areas ``Fire safety of large roofs for buildings“.

* Material guarantee registered with Central Association of German Roofing Contractors (ZVDH)


Our products are available in other dimensions and thicknesses on request.

We use Cookies to optimally configure and continuously improve our website for your usage. By continuing utilization of the website, you agree to the use of cookies.
For more information about cookies, please see our Privacy Policy.
Agreed!